pretty passion

Friday, 16 February 2018

Name plate -- Peacock and vintage style

Hello folks,

I have a beautiful name plate to showcase today on the blog.

Let me share the picture of the name plate first to jump on the material used and procedure later.

Sharing some close ups of the name plate now

Material used:
Raw name plate base from TECS
Pattern paper
Wooden peacock embellishment from TECS
Vintage side corner embellishment from TECS
Wooden alphabets for surname from TECS
Glossy accents
Crystal glitter
Prima blue and green acrylic colors
Archival ink- Majestic Violet
White embossing powder
Heat tool
Versamark ink
Inka gold

Take a raw name plate base and apply Gold inka color generously all over except the portion to be covered with pattern paper.Cut the pattern paper to fit size as desired.
Take the peacock embellishment and apply acrylic colors as per design, once that dries,apply Crystal Glitter.
For the corner wooden embellishment,just rub the archival ink keeping the vintage effect alive.
For the name,ink all alphabets with Versamark ink and put white embossing powder on it, shake off the extra powder and then heat set it with heat tool.
Adhere everything with clear glue or glossy accents.

Hope you have liked the name plate.Attaching the link of TECS where you can find all products

Happy Crafting!!

Love and hearts card

Hello crafty folks,
Anushree here

Today I have made a beautiful love card keeping Valentine's Day in mind .This card is super cool and easy and trust me its beautiful too.Let me share a picture of the card first.

Material Used:


I have used Hearts stencil by Craftyscrappers along with Shimmer paint Dried lavender.The stamp set used is JUST A NOTE.

I have explained the whole procedure of its making in my video tutorial.Do watch and leave love.

Happy Crafting!!

Thursday, 1 February 2018

Birds and Branches photo frame with Heartfelt flowers

Hello friends,

I am so glad to present my another project with loads of cute little Heartfelt Creations flowers today.This one I have named as "Birds and Branches Frame".

Its a photo frame where photo can be changed and replaced from the back.The full frame is made of sturdy MDF with thickness of 4mm.

Here is a picture of the frame ,after that I will put down the material and procedure involved.

Material used:

Raw MDF frame
Pattern paper
Mod Podge
Chipboard embellishments
Flowers made with stamps and dies from Heartfelt creations


I got a raw frame ,Then I chose a coordinating pattern paper and started gluing it with the help of Mod Podge . After the glue dried,I scraped off the extra paper and sanded off the remaining extra with the help of sand paper.

After that,I took the Chipboards and colored them with alcohol markers.I have made some beautiful small flowers with the help of Heartfelt Sunkissed Fleur stamp and die and Botanical rose stamp and coordinating die.I started sticking all embellishments on the frame now. TADAAA...its done...yes it was that simple and quick.Sharing few more pics from different angles.

This project was super quick and beautiful...Hope you liked it too.

Do leave your love in comments section.Thanks for dropping by.

Happy Crafting!!

Monday, 29 January 2018

I Adore You Wedding Card

Hello Everyone!!

Today I have a beautiful Wedding card which I designed recently for a Card company...They wanted a handmade card with lovely flowers...and when it comes to flowers,For me its Altenew by default💓😇😊

I have used Adore you Stamp set from Altenew .I have made an outer Die cover with kraft paper and white fleece paper and inserts are done with gold embossing and water coloring.Let me share some pictures of the same first.

This is the main insert where all details would be there

This is another insert with simple water color splash. 

I have used Zig clean color pens for water coloring,Gold embossing powder is from Rangers and Lastly on the main insert I have done some black paint splatters.I was completely inspired by Erum"s beautiful Inspiration card for January month.

I have few more closeups of the card to share

I am entering this card to following challenges

Thanks for dropping by!!


Saturday, 27 January 2018

Arabesque Medallion by Altenew

This is my birthday month and I am keeping super busy ,honestly I dont know where I am spending time but its flying and I am getting very less time for crafting.

Recently I bought few Altenew stamps and one among them was Arabesque Medallion.This stamp set has some magic,when I saw it first time I knew I need to have I am happy to share an Octagon flip card with this beautiful stamp set.Here is a picture of the same

I have used alcohol markers from Altenew with a combination of water coloring on white heat embossed stamped design.I took a 6*6 sheet and did the heat embossing and coloring on it.Then I cut it into 9 equal pieces.And pasted them on another 6*6 sheet with double sided tape...the center one is attached with joining double sided tape twice to uplift a little more.After all attachments,have cut the four sides slanting way.The sentiment is also from the same stamp set.Added that again with double sided tape.So this card is like three layered one.

Hope u liked it.

I am entering this card to altenew-january-2018-inspiration-challenge/ ...I was completely inspired by this month inspiration card by Erum and its beautiful color chart

Thanks for dropping by!!

Friday, 26 January 2018

Flowery photo frame with Sun kissed Fleur

Hello friends,

Today I am on my blog with a beautiful flowery photo frame.This time I enjoyed using some best supplies from my stash.Its been more than a year owning my Sun kissed fleur Stamp and Die from Heartfelt Creations and I am yet not over it. Let me share a picture of the frame first ,after that will take you through the supplies list and step by step procedure for the same.So here is my frame.

I cant stop admiring this beauty.Let me share now step by step making of the same.

Firstly I made a photo frame using handmade paper.

Then I took Mdf embellishment,diamond dust and Bitter lemon Shimmer spray. I mixed the spay and diamond dust in a separate bowl and then stuck on Mdf with the help of clear glue.

Then I broke the embellishment into two pieces and stuck on the frame with the help of glossy accents.

After this I made these paper flowers using Premium Card stock - White color and Sun Kissed Fleur stamp and die set from Heartfelt Creations . I have used distress inks to color the flower and added some leftover diamond dust.I also made some leaves with Classic Rose Vines stamp and die set (Heartfelt Creations)

After arranging all on the frame, with few more fillers,this is how my frame looks like.

Sharing some close ups of the frame,

 It was great making this frame.Hope you enjoyed it too.

Happy Crafting.


Friday, 19 January 2018

Mixed media cover

Hello Friends!
Anushree here

Today I have a Mixed media layout to inspire you completely.

For this layout I have used Color splash stencil and Distress circle stencil from Craftyscrappers.I used Shimmer paste,Sonoma,Tickled and Pumpkin to create base for the layout fisrt.,with these pastes I did wet paste embossing on the layout.The paste dries in next 15 minutes giving a gorgeous 2D embossing effect.Then I pasted mesh fabric with the help of Fun glue by Craftyscrappers.

The Flower is handmade with White Cardstock from Craftyscrappers again and then I painted it using Shimmer sparay-Grape juice.Leaves are also painted using shimmer spray-bitter lemon.

I applied one more top coat of shimmer sprays on overall project after attaching them to desired places.The Mdf's are also from the Craftyscrappers and painted with prima acrylic colors.Lastly added some gold micro beads here and there on the layout to add shimmer.

Hope you liked what I made today

Happy Crafting!!